Need ostomy help now? Call for product selection, fitting and fast support.☎ +961 76 62 62 26☎ +961 71 36 12 03WhatsApp for Fast Help
HollisterReference 34500DI · 35500DI · 37500DI

Hollister Flat Skin Barrier in Lebanon — Conform 2 FlexWear

The base of a two-piece Conform 2 system. A flat FlexWear wafer you cut to the shape of your own stoma, worn for several days while pouches are changed on and off the flange as often as needed.

45 mm55 mm70 mm
  • Cut-to-fit opening, shaped to your own stoma
  • Flange sizes 45, 55 and 70 mm
  • Change the pouch without disturbing the barrier
PRODUCT DETAIL

Features and patient benefits

Features

  • FlexWear skin barrier, flat profile
  • Cut-to-fit opening for irregular or oval stomas
  • Conform 2 mechanical coupling in 45, 55 and 70 mm
  • Tape border and belt tabs on selected references

Patient benefits

  • Suits a stoma that sits at or above skin level on reasonably flat skin
  • Pouches can be changed several times a day without pulling adhesive off the skin
  • Cutting to shape gives a closer fit than a pre-cut opening on an oval stoma
  • Fewer barrier changes usually means healthier peristomal skin
SPECIFICATIONS

Sizes, references and compatibility

BrandHollister
SystemTwo-piece — Hollister Conform 2
Available sizes45 mm · 55 mm · 70 mm
Reference34500DI · 35500DI · 37500DI
References34500DI (45 mm) · 35500DI (55 mm) · 37500DI (70 mm)
ProfileFlat
OpeningCut-to-fit
BarrierFlexWear
Compatible pouchesHollister Conform 2 closed, drainable and urostomy pouches

Two-piece systems only fit when the flange size on the pouch matches the flange size on the skin barrier. Hollister Conform 2 uses 45, 55 and 70 mm; HDL-Hendry uses 50, 60 and 70 mm. The two ranges are not interchangeable.

PRACTICAL GUIDANCE

How this product is used

Measure the stoma with the guide supplied, cut the opening about 2 mm larger than the stoma so the wafer does not rub it, warm the barrier briefly between your hands, then press it onto clean dry skin and hold it for around thirty seconds. Body heat is what makes a hydrocolloid barrier bond properly.

A flat barrier is the right starting point when the stoma protrudes slightly and the skin around it is even. If output keeps getting underneath, the answer is usually a barrier ring or paste first — and a convex barrier only if the stoma is flush or retracted.

Flange size is not the same as stoma size. The 45, 55 and 70 mm refer to the coupling ring that the pouch clicks onto, and the pouch must carry the same number. Hollister 45/55/70 and HDL-Hendry 50/60/70 do not interchange.

COMPLETE THE SYSTEM

Often ordered together

PATIENT QUESTIONS

Frequently asked questions

How large should I cut the opening?

About 2 mm larger than the stoma at its widest point. Too large exposes skin to output; too tight can rub the stoma. Re-measure in the first weeks after surgery, because the stoma shrinks.

How long can I wear a flat barrier?

Wear time varies with output, skin and activity, and is usually a few days. Change it if you feel itching or burning under the wafer rather than waiting for a leak.

Can I use a Hollister barrier with an HDL-Hendry pouch?

No. The flange sizes differ — Hollister uses 45, 55 and 70 mm and HDL-Hendry 50, 60 and 70 mm — and the coupling designs are not interchangeable.

ORDER FROM STOMACARE LEBANON

Where to buy this product in Lebanon

Order directly from StomaCare Lebanon by WhatsApp or phone. We deliver across Lebanon and can coordinate shipping outside Lebanon.

If you are not sure of the reference or the flange size, send a photo of your current box on WhatsApp and we will identify it for you.

Fanar, Main Road, Kikano Building, Ground Floor, Lebanon  ·  info@stomacarelb.com